ADVERTISEMENT

How to Insert a Spring into a Door Hinge and Keep It Closed

    ADVERTISEMENT

    To install a spring in a door hinge and ensure the door stays closed, follow these steps:

    1.Choose the Correct Spring:
    Make sure to select a spring with the appropriate tension to keep the door closed. There are several types of springs available, including tension springs, torsion springs, and automatic closing springs.

    2.Remove the Existing Hinge:
    Carefully unscrew the existing hinge from both the door and the door frame.

    3.Install the Spring into the Hinge:

     

     

    see continuation on next page

    ADVERTISEMENT

    ADVERTISEMENT

    3.Install the Spring into the Hinge:
    Place the spring into the hinge, following the manufacturer’s instructions. Align the spring correctly so that it applies pressure to close the door.

    4.Reattach the Hinge:
    Screw the hinge back into the door and the frame, ensuring that the spring is properly positioned.

    5.Adjust the Spring Tension (If Needed):
    Some springs allow you to adjust the tension to control how forcefully the door closes. Adjust the tension to your preference.

    6.Test and Adjust:
    Open and close the door several times to make sure the spring is working as expected. If necessary, make further adjustments to the spring’s tension.

    Safety Tip:

    Installing a spring in a door hinge may require carpentry skills or technical knowledge. If you’re unsure about doing this yourself, it’s recommended to seek the help of a professional to ensure a safe and effective installation.

    ADVERTISEMENT

ADVERTISEMENT


Leave a Comment